EverSolo AMP-F2 2 Ch Class D Power Amplifier

$1,249.00

The Eversolo AMP-F2 is a 2 channel class D power amplifier, designed in collaboration with Starke Sound in California.

Pair with the DMP-A6 or A6 Master for the perfect mini system. The size of the AMP-F2 is a perfect match for the DMP-A6 / DMP-A6 Master / DAC-Z8 etc.

9 in stock (can be backordered)

SKU: EVERSOLOAMPF2 Category:

Description

Eversolo AMP-F2 2ch Class D Power Amplifier

The Eversolo AMP-F2 is a 2-channel class D power amplifier, designed in collaboration with Starke Sound in California, and is based on the innovative NS600 module created by the Starke Sound team.

Pair with the DMP-A6 or A6 Master for the Perfect Mini System

The compact size of the AMP-F2 is a perfect match for the DMP-A6 / DMP-A6 Master / DAC-Z8 etc.

Dynamic Power, Detailed Presentation

The Eversolo AMP-F2 is a 2-channel class D power amplifier, designed in collaboration with Starke Sound in California, and is based on the innovative NS600 module created by the Starke Sound team. The AMP-F2 features a high sampling rate of 600kHz and employs an efficient Class D amplification structure, coupled with optimised circuits to maximise audio quality. A newly designed SAPS audio-specific switch mode power supply significantly reduces noise and enhances dynamic performance. The AMP-F2 is also bridgeable, allowing flexible configuration for two-channel or single-channel setups.

Vigorous Output

The AMP-F2 is equipped with Starke Sound’s NS600 amplifier module. Each channel can output a constant 250W RMS (4 ohms) @ 1% THD+N. When bridged, the AMP-F2 can support up to 450 W RMS (2 ohms) with THD+N still below 1%. This ability to handle extremely low-impedance loads ensures ample energy even in large and challenging speaker setups, particularly during high-dynamic low-frequency outputs.

Accurate Sound, NS600 Module

The NS600 module by Starke Sound employs PurePath™️ Ultra-HD technology and advanced integrated feedback design, featuring high-speed gate driver error correction functions. This technology achieves ultra-low distortion across the entire audio frequency range, delivering perfect high-end audio.

Powerful Drive

Featuring a 600W high-efficiency, low-ripple, low-EMI switch mode power supply, the AMP-F2 delivers consistent and powerful output, extremely low noise, and enhanced dynamic performance across the system.

Environmentally Friendly Power Consumption

The AMP-F2 has an extremely low standby power draw (0.5W) and idle power consumption (14W), meaning it is kinder to your energy bill.

Aluminium Body, Shielded Design

The AMP-F2’s chassis is made from aluminium with complete self-protection and an anti-interference design to avoid disturbances from various electrical environments.

The AMP-F2 is also designed to perfectly match the size of the DMP-A6, DMP-A6 Master, and DAC-Z8. It is also compatible with the DMP-A8 and DAC-Z6.

One-Touch Activation, Seamless Control

The AMP-F2 is equipped with standard 12V TRIGGER IN and TRIGGER OUT functions, allowing it to be synchronised with other devices that support the standard TRIGGER interface for power on and off. Using the USB to TRIGGER adaptor cable provided with the AMP-F2, you can connect the USB Type-A interface of the DMP-A6 to the TRIGGER IN of the AMP-F2 to achieve synchronisation.

KEY FEATURES:
• 145W @ 8Ω (1% THD), 250W @ 4Ω (1% THD)
• 2 channel Class D power amplifier
• Bridgeable for mono applications
• Developed in collaboration with Starke Sound

Additional information

Weight 2 kg
Dimensions 20 × 40 × 40 cm

There are no reviews yet.

Be the first to review “EverSolo AMP-F2 2 Ch Class D Power Amplifier”

Your email address will not be published. Required fields are marked *